Table of Contents
Advertisement
5)
Click
.
f The [Add content] screen is displayed.
6)
Click
on the [Add content] screen.
f The file selection screen is displayed.
7)
Select the still image file of the pattern to be newly registered, and click the [Open] button.
f To replace it with another pattern, prepare a still image file having the same file name as the one deleted.
f The content name entry screen is displayed.
8)
Enter any [Content name], and click the [Enter] button.
f The content is registered in the [Add content] screen.
9)
When addition of contents to register is complete, click the [Save] button.
f Added contents are registered in the SD card.
Note
f When the content to be deleted or replaced is registered in a schedule or slideshow, the content cannot be deleted.
[Effect]
The following table shows the special effects ([Effect]) which can be set to still image contents and used when
changing the playback screen.
[Off]
[Random]
[Wipe left]
[Wipe right]
[Wipe down]
[Split]
[Zoom out]
[Fade]
[Blind]
[Checker wipe]
[Slide in]
[Slide out]
196 - ENGLISH
Chapter 5 Operations — Content Manager
Does not apply image effects.
Applies image effects randomly.
Displays the image gradually from the left like wiping.
Displays the image gradually from the right like wiping.
Displays the image gradually from the top like wiping.
Displays the image gradually from the center toward the left and right like wiping.
Displays the image gradually from the center towards the entire image.
Displays the entire image gradually.
Displays the image gradually like opening vertical blind.
Displays the image gradually from the left to right in checkerboard patterns.
Displays the next screen as if it slides in from the right to left.
Displays the next screen by removing the current screen as if it slides out from the right to left.
Content addition
Advertisement
Table of Contents
