Table of Contents
Advertisement
[LIGHTING] menu
(Only in the lighting mode)
On the menu screen, select [LIGHTING] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 54) for the operation of the menu screen.
f After selecting the item, press asqw to set.
[PATTERN]
Select the lighting pattern.
1)
Press as to select [PATTERN].
2)
Press qw or the <ENTER> button.
f The [PATTERN] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[CIRCULAR LIGHT1]
[CIRCULAR LIGHT2]
[SD1] - [SD10]
Note
f For how to register the lighting pattern to an SD card, refer to "Registering a lighting pattern" (x page 192).
f Even when either of [SD1] to [SD10] is set as [PATTERN], the pattern will be the same as that for [CIRCULAR LIGHT1] if corresponding still
image contents are not registered to the SD card or if an SD card is not inserted into the SD card slot.
[COLOR SETTING]
Set the color for lighting.
1)
Press as to select [COLOR SETTING].
2)
Press qw or the <ENTER> button.
f The [COLOR SETTING] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[SUPER WHITE]
[NEUTRAL]
[WHITE]
[WARM WHITE]
[LIGHT]
[RED]
[GREEN]
[BLUE]
[YELLOW]
[CYAN]
[MAGENTA]
[USER1] - [USER5]
Note
f If [COLOR SETTING] is set to [NEUTRAL], [WHITE], [WARM WHITE], or [LIGHT], the color is also reflected in the menu screen.
f The [USER1] to [USER5] settings are shared with [User L1] to [User L5] in the Content Manager. Changes to the [USER1] to [USER5]
settings are also reflected in [User L1] to [User L5] respectively. ("[Color]" (x page 197))
Setting a desired color
1)
Press as to select [COLOR SETTING].
Chapter 4 Settings — [LIGHTING] menu
Sets the pattern to circular light.
Sets the pattern to circular light with shading on the edge.
Selects an item to use contents registered to an SD card.
Sets the brightness to maximum.
Sets the color to neutral white.
Sets the color to white.
Sets the color to warm white.
Sets the color to light bulb color.
Sets the color to red.
Sets the color to green.
Sets the color to blue.
Sets the color to yellow.
Sets the color to cyan.
Sets the color to magenta.
Adjusts the color. Refer to "Setting a desired color" (x page 59) for details.
ENGLISH - 59
Advertisement
Table of Contents
