Computers For The Signage Setting; Procedure Of Signage Setting - Panasonic PT-JW130FWU Operating Instructions Manual

Table of Contents

Advertisement

Extension
aac
Music
MPEG-1/2 Audio Layer-3
mp3
wma
Note
f Some information for still image/movie/music files can be viewed with a computer where relevant files are accessible.
Operation example
g For Windows computer
1.
Right-click a file, and click [Properties].
2.
Click the [Details] tab.
g For Mac
1.
Click a file while holding down the "Control" key, and click [Get Info].
2.
Click [More Info].
f The maximum file size that can be used is 2 GB.
The following table shows the playback time when a 2 GB movie file is used. However, the following playback time is an estimate and may
differ depending on the compression method such as encoding and codec.
Resolution
720 x 240
720 x 480
f Files protected by DRM (Digital Rights Management) cannot be used.
f Some files listed as compatible formats may still not be able to be used.
f Use the SD card with high data transfer speed. If the data transfer speed is slow, movie or music recorded in the SD card may not be played
back properly or it may take time to display a still image. (Speed class: Class 10 recommended)
f For SD cards compatible with the projector, refer to "Cards that can be used with the projector" (x page 48).

Computers for the signage setting

The signage setting is performed by connecting a client computer (including iPad/iPhone/iPod touch or Android
terminal) to the projector.
A web browser is required for the setting. Prepare a computer which satisfies the following conditions beforehand.
OS (Operating System)
Windows 7/Windows 8/Windows 8.1
Mac OS X v10.6/Mac OS X v10.7/Mac OS X v10.8/Mac OS X v10.9
Android 4.1/4.2/4.3/4.4

Procedure of signage setting

The procedure to perform signage setting with the Content Manager is as follows. For details, refer to the
corresponding reference pages.
Playing by registering a schedule
1)
Insert an SD card in the SD card slot. (x page 49)
2)
Connect the client computer (including iPad/iPhone/iPod touch or Android terminal) and the projector
via LAN. (x page 100)
3)
Access the projector from the web browser, and log in to the Content Manager. (x page 128)
4)
On the start screen, click the [Schedule] button.
5)
Create a timetable. (x page 132)
6)
Register a schedule. (x page 157)
Chapter 5 Operations — Content Manager
Audio codec
AAC
Sample rate: Maximum 48 kHz
Channel: Maximum 2 ch
(MP3)
Bit rate: Maximum 384 kbps
WMA
Bit rate
Approx. 2 Mbps
Approx. 5 Mbps
iOS 6/7
Audio format
Estimate of playback time
Web browser
Internet Explorer 10.0/11.0
f Except for Internet Explorer 10 for Windows 8 Modern UI and
Internet Explorer 11 for Windows 8.1 Modern UI.
Google Chrome 33
Safari 5.0/6.0/7.0
Google Chrome
Safari 6.0/7.0
Approx. 120 minutes
Approx. 50 minutes
ENGLISH - 127

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-jw130fbu

Table of Contents