Table of Contents
Advertisement
Connection example for image transfer
(Example) Displaying copyright-protected contents
Illustration of
connection
Input
Miracast
Communication
IEEE802.11a/n
method
Connection
WPS + Wi-Fi Direct
method
Image
Miracast
transmission
method
Setting for projector
1)
Turn on the projector.
2)
Press the <MENU> button to open the [NETWORK] menu and set [WIRELESS LAN] to either of
[M-DIRECT], [USER1], [USER2], or [USER3].
3)
Configure the settings of the connection method selected in Step 2).
f Refer to [WIRELESS LAN] (x page 77) for details.
Note
f Wireless LAN and wired LAN cannot be used in the same segment.
f If multiple devices are to be connected, set IP addresses that do not overlap.
f Enter SSID correctly in single-byte alphanumeric characters.
f "any" or "ANY" cannot be set for SSID.
f This setting is not necessary when connecting Miracast. Refer to "Miracast function" (x page 125) for Miracast.
f The following settings are configured as the factory defaults.
[M-DIRECT]
102 - ENGLISH
Chapter 5 Operations — Network connection
Miracast
Projector
Miracast
Miracast compatible device
[IP ADDRESS]
[SUBNET MASK]
[SSID]
[CHANNEL]
[KEY]
Image transfer application software
(Example) Displaying on multiple screens
Projector
iPad/iPhone/iPod touch, Android terminal, and computer
on which Panasonic's image transfer application software
has been installed
Panasonic APPLICATION
IEEE802.11b/g/n
Panasonic exclusive method + connection by user
Panasonic exclusive method
192.168.12.100
255.255.255.0
M-DIRECTxxxx (xxxx stands for the last four-digit number of the
network ID.)
1
The same character string as SSID
Advertisement
Table of Contents
