H
F
A
Figure A
1, 2 – Crown positions
H – Hour Hand
M – Minute Hand
S – Small Seconds Hand
F – 24-Hour Hand
A – Skeleton Aperature
To WIND the movement by hand:
The motion of your arm during normal daily activities should be
sufficient to keep the movement of your automatic timepiece wound.
However, if you have not worn your watch for approximately 38 to 40
hours or more, and the watch has stopped, you will need to wind it by
hand before setting the time:
1. With the crown in position 1, turn the crown clockwise
approximately 20 revolutions.
2. Reset the Time following instructions below.
To set the TIME:
1. Pull crown out to position 2; watch (small seconds hand S) stops.
2. Turn crown in either direction to set hour H and minute M hands
to desired time.
3. Push crown back in to position 1; watch (small seconds hand S)
restarts.
NOTE: 24-hour hand F will move in sync with Hour hand H and
Minute hand M, so when setting the time, make sure to take AM/PM
time into account.
AUTOMATIC MULTI-FUNCTION MODELS
with small seconds and 24-hour hands, and skeleton dial aperture
Includes Gran Premio Automatic (SF 111, 111.1) watch models
M
1 – 2
S
Legend