Quartz Multi-Function Models - Type A; Includes Fxx (Sf 155.1) Multi-Function Watch Models - SCUDERIA FERRARI Pit Crew Operating Instructions Manual

H
F
S
Figure A
1, 2, 3 – Crown positions
H – Hour Hand
M – Minute Hand
S – Seconds Hand
D – Date Indicator
F – 24-Hour Hand
These multi-eye models feature center-mounted hour, minute and
seconds hands, and small date and 24-hour indicators.
To set the TIME:
1. Pull crown out to position 3 when seconds hand S reaches 12
o'clock; watch (seconds hand S) stops.
2. Turn crown in either direction to set hour H and minute M hands
to desired time, taking AM/PM time into account.
3. Push crown back in to position 1; watch (seconds hand S) restarts.
NOTE: 24-hour hand F will move in sync with hour hand H, so when
setting the time, be sure to take AM/PM time into account so that
24-hour hand is set correctly.
When setting the minutes, advance minute hand M 4 to 5 minutes
ahead of the desired time, then turn it back to indicate the exact
minute.
To set the DATE:
1. Pull crown out to position 2.
2. Turn crown counterclockwise until date indicator hand D points
to correct date.
NOTE: Date indicator hand D will not move when crown is turned
clockwise.
3. Push crown back in to position 1.
IMPORTANT: Do not adjust the date between the hours of 9:00 PM
and 1:00 AM when automatic calendar changes are in progress or the
date may not change automatically on the following day.
NOTES: While setting date indicator hand D, check to make sure that
it is moving properly in one-day increments.
It will be necessary to adjust the date following any month with fewer
than 31 days.
QUARTZ MULTI-FUNCTION MODELS – TYPE A
with small date and 24-hour hands

Includes FXX (SF 155.1) multi-function watch models

M
1 – 2 – 3
D
Legend