Product View; Digital Touch-Screen Models; With Led Dual-Time Zone And Month/Date Display; Includes Aero Touch (Sf 156.1) Digital Quartz Models - SCUDERIA FERRARI Pit Crew Operating Instructions Manual

P
T1
T2
Figure A
C
Figure B
LED – Main Digital Display
T1
– Time Zone 1 Mode Indicator
T2
– Time Zone 2 Mode Indicator
DA – Date Mode Indicator
P
– PM Indicator (appears in Setting Mode only)
Touch regions
A – ON/OFF
B – SET
C – SWIPE
D – SWIPE
The crystal over the dial has four touch regions or quadrants:
A – Touch near 12 o'clock to turn the watch ON or OFF.
B – Touch near 6 o'clock to SET the active display.
C/D –Swipe your fi nger horizontally in either direction to move from
one display MODE to another:
Mode sequence:
n
TIME1 TIME2
(Hour/Minutes) (Hour/Minutes)

DIGITAL TOUCH-SCREEN MODELS

with LED dual-time zone and month/date display

Includes Aero Touch (SF 156.1) digital quartz models

LED
DA
A
D
B
Legend
n
DATE
(Month/Date)
These dual-time digital watch models feature an innovative touch
screen 4-Digit LED display with 3-mode function: TIME1, TIME2
and DATE. In the Main LED display, the TIME Modes are shown in
12-hour format; the DATE Mode appears in Month/Date format.
One of three smaller LED displays beneath the Main one indicates
which Mode is active. The touch-screen crystal is specially treated
to resist fi ngerprints/smudging.
Operating the Watch/Touch-Screen:
1. To turn your watch ON, touch the Racing Shield in region A,
maintaining contact for about 2 seconds until the LED display
lights up. TIME1 will automatically display at start-up.
NOTE: Once ON, whenever the touch screen idles (is not touched)
for 5 seconds, the watch will go into Sleep Mode, and the LED display
will go dark, conserving battery power: Touch any region to wake up
the LED display.
2. To move between the 3 Display Modes, swipe your fi nger across
regions C and D in either direction.
3. To turn the watch OFF, touch the Racing Shield in region A for
about 2 seconds until the LED displays the word "bye", then
goes dark.
NOTE: If the 5-second LED display is activated fi ve times a day,
battery life expectancy is 24 months. More frequent operation will
decrease battery life.
Setting the Time/Date:
You may enter the Setting Mode from any of the 3 Display Modes –
TIME1, TIME2 or DATE:
1. To enter Setting Mode, touch region B, maintaining contact for
about 2 seconds until the fi rst 2 digits in the active LED Display
Mode start to blink.
NOTE: While the display is blinking, if the screen idles (is not
touched) for 10 seconds, the watch will exit Setting Mode and return
to normal Display Mode: Repeat step one to re-enter Setting Mode.
2. Swipe your fi nger across the screen from region C to D to increase
the blinking number, or from region D to C to decrease it.
3. To confi rm the new blinking setting for Hour or Month, touch
region B for about 1.5 seconds until the fi rst 2 digits stop blinking,
and the second 2 digits start blinking.
4. Swipe your fi nger across the screen from region C to D to increase
the blinking number, or swipe from region D to C to decrease it.
5. To confi rm the new blinking setting for Minutes or Date, touch
region B for about 1.5 seconds until the second 2 digits stop
blinking, and watch exits Setting Mode.
NOTE: "P" indicating PM time and "Year" will only be displayed while
the watch is in Setting Mode (for Time or Date, respectively); they will
not appear in TIME1, TIME2 or DATE Display Mode.