Hand Quartz Models With Day/Date Display - SCUDERIA FERRARI Pit Crew Operating Instructions Manual

3-HAND QUARTZ MODELS WITH DAY/DATE DISPLAY

Includes Scuderia (SF 105.4, 105.6), D50 (SF 136.1, 136.2, 136.3) and Gran Premio Quartz (SF 138.1, 138.2) watch models
A
1 – 2 – 3
Figure A
Legend
1, 2, 3 – Crown positions
A – Date Display
Crown Positions:
Position 1 - Normal position. Crown pushed against case.
Position 2 - To set Day: Rotate crown clockwise.
To set DATE: Rotate crown counterclockwise.
Position 3 - To set TIME: Rotate crown in either direction.
NOTE: When the watch is running, the Date will change gradually
between 11:00 PM and 12:00 AM, and the Day will change gradually
between 2:00 AM and 4:00AM.
IMPORTANT: Do not adjust the Day or Date between the hours
of 9:00 PM and 4:00 AM when automatic calendar changes are in
progress, or the Day and Date may not change properly on the
following day.
To manually wind an automatic movement:
The motion of your arm during normal daily activities should be
sufficient to keep the movement of your automatic timepiece wound.
However, if you have not worn your watch for approximately 38 to 40
hours or more, and the watch has stopped, you will need to wind it by
hand before setting the time:
1. With the crown in position 1, turn the crown clockwise
approximately 20 revolutions.
2. Reset Time and Date/Date following instructions above.