Automatic Worldtime Models; With City Time Zone Indication - SCUDERIA FERRARI Pit Crew Operating Instructions Manual

Includes Gran Premio (SF 108, 108.2, 108.3) limited edition Swiss automatic models
H
T
W
Figure A
1, 2, 3 – Crown positions
Button A – Time Zone City Selector
Button B – Time Zone Corrector
H – Hour Hand
M – Minute Hand
W – City Indicator
T – Time Zone Indicator
S – Seconds Hand
D – Date Display
These limited edition Worldtime models feature a fine 21-jewel Swiss
automatic movement with unique World Cities/Second Time Zone
Indication and 42-hour power reserve.
To operate the SCREW-DOWN CROWN:
These watches are equipped with a screw-down crown. Before you
can set the Time or Date, you must first unlock the crown by turning
it counterclockwise approximately six rotations. After Time/Date
setting, the crown must be screwed back down into the case clockwise
to ensure water resistance.
CAUTION: Do not pull the crown out or push the buttons while the
watch is underwater.
To WIND the movement by hand:
The motion of your arm during normal daily activities should be
sufficient to keep the movement of your automatic timepiece wound.
However, if you have not worn your watch for 42 hours or more, and
the watch has stopped, you will need to wind it by hand before setting
the time:
1. With the crown in position 1, turn the crown clockwise
approximately 20 revolutions.
2. Reset the Time following instructions below.

AUTOMATIC WORLDTIME MODELS

with city time zone indication

A
M
1 – 2 – 3
B
S
Legend
To set the TIME:
1. Unlock crown and pull it out to position 3; watch (seconds
hand S) stops.
2. Turn crown in either direction to set hour H and minute M hands
to desired time.
3. Push crown back in to position 1; watch restarts.
D
4. Screw crown back down into case.
To set the DATE:
Quick Setting:
CAUTION: Never use Quick Date Setting when the time is between
8:00 PM and 1:00 AM and automatic calendar changes are already
in progress. Doing so could damage the mechanism.
1. Unlock crown and pull it out to position 2; watch (seconds
hand S) continues to run.
2. Turn crown counterclockwise to adjust Date in window D.
3. Push crown back in to position 1, and screw it back down
into case.
Slow Setting:
To ensure that the Date changes at midnight and not at noon:
1. Unlock crown and pull it out to position 3.
2. Turn crown clockwise, advancing Hour H and Minute M hands
past midnight repeatedly until correct Date appears in window D,
then continue turning crown clockwise to move hands to
desired time.
3. Push crown back in to position 1, and screw it back down
into case.
To set the Time Zone City:
Press Button A until desired World City name appears in center of
City Indicator display W.
NOTE: To advance cities rapidly press and hold Button A.
To set the Time Zone Number:
Press Button B until desired number appears in center of Time Zone
Indicator display T.
NOTE: To advance numbers rapidly, press and hold Button B.