Automatic Bi-Retrograde Skeleton Models; Includes F14-R (Sf 124.1) Limited Edition Swiss Automatic Models - SCUDERIA FERRARI Pit Crew Operating Instructions Manual

AUTOMATIC BI-RETROGRADE SKELETON MODELS

H
D
Figure A
1, 2 – Crown positions
Button A – Date Corrector
Button B – Day Corrector
H – Hour Hand
M – Minute Hand
D – Retrograde Date Indicator
W – Retrograde Day Indicator
These limited edition bi-retrograde models feature a fine 29-jewel
Swiss automatic skeletonized movement with wedge-shaped
retrograde Day and Date displays and 44-hour power reserve.
To WIND the movement by hand:
The motion of your arm during normal daily activities should be
sufficient to keep the movement of your automatic timepiece wound.
However, if you have not worn your watch for 44 hours or more, and
the watch has stopped, you will need to wind it by hand before setting
the time:
1. With the crown in position 1, turn the crown clockwise
approximately 20 revolutions.
2. Reset the Time following instructions below.
Crown Positions:
Position 1 - Normal/hand-winding position; flush against case.
Position 2 - To set TIME: Rotate crown in either direction.
Corrector Buttons:
Use the corrector tool included with your watch, or a similar pointed
object such as the tip of a pen, to depress recessed corrector buttons
located on the sides of the case:
Button A - Press to manually correct/advance Retrograde Date D
Button B - Press to manually correct/advance Retrograde Day W

Includes F14-R (SF 124.1) limited edition Swiss automatic models

A
M
1 – 2
B
W
Legend