Quartz Multi-Function Models - Type B; Includes Redrev T (161.1) Multi-Function Watch Models - SCUDERIA FERRARI Pit Crew Operating Instructions Manual

H
F
S
Figure A
1, 2 – Crown positions
H – Hour Hand
M – Minute Hand
S – Seconds Hand
W – Day Indicator
D – Date Indicator
F – 24-Hour Hand
Day Corrector Button A
Date Corrector Button B
These multi-eye models feature center-mounted hour, minute and
seconds hands, and small day, date and 24-hour indicators.
To set the TIME:
1. Pull crown out to position 2 when seconds hand S reaches
12 o'clock; watch (seconds hand S) stops.
2. Turn crown in either direction to set hour H and minute M hands
to desired time, taking AM/PM time into account.
3. Push crown back in to position 1; watch (seconds hand S) restarts.
NOTE: 24-hour hand F will move in sync with hour hand H, so when
setting the time, be sure to take AM/PM time into account so that
24-hour hand is set correctly.
When setting the minutes, advance minute hand M 4 to 5 minutes
ahead of the desired time, then turn it back to indicate the exact
minute.
To set the DAY and DATE:
1. Use button A to correct weekday. Each time you press and release
button A, Day indicator hand W will advance to the next day.
2. Use button B to correct date. Each time you press and release
button B, Date indicator hand D will advance by one number/tick.
QUARTZ MULTI-FUNCTION MODELS – TYPE B
with small day, date and 24-hour hands

Includes RedRev T (161.1) multi-function watch models

M
W
A
1 – 2
B
D
Legend