Residual Range - BMW R 1200 ST User Manual

3
36
» The following appear in the
display field 2 in this order:
– Total distance covered
– Tripmeter 1 (Trip I)
– Tripmeter 2 (Trip II)

– Residual range

Residual range
Residual range
Residual range is calculated
on the basis of your style of
riding and the amount of fuel
left in the tank; the reading
indicates the estimated dis-
tance you can travel before the
fuel supply runs out.
If the motorcycle is resting on
its side stand, the level in the
tank cannot be measured cor-
rectly, so this estimate of
residual operating range will
be inaccurate.
When you refuel (ignition
switched off) the Tripmaster
does not register the increase
in fuel level unless more than 2
liters are added to the fuel
already in the tank. The tank
must contain at least 5 liters of
fuel for the fuel-gauge reading
and the residual range to be
recalculated.
The residual range is only an
approximate reading. Conse-
quently, you should not try to
use the full residual range
before refueling.
Resetting tripmeter
• Switch on the ignition.
• Select the desired tripmeter.
• Press the Tripmaster button
for longer than
2 seconds.
» The tripmeter is reset to
zero.