BMW R 1200 ST User Manual page 109

• Remove bulb 5.
Installation is the reverse of the
removal procedure.
• When installing, make sure
that lug 6 is pointing up and
that the bulb is securely
seated.
• Check that the bulb is cor-
rected seated (by looking in
through the headlight lens).
Replacing side light bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the op-
erations described below.
Make sure that the motorcycle
is steady on its stand.c
The side light bulb is located in
the housing of the lower head-
light.
• Switch off the ignition.
• Pull the bulb socket 1 out of
the headlight housing.
• Remove bulb 2 from the bulb
holder.
6
107