BMW R 1200 ST User Manual page 102

Installing front wheel
6
The types of screw
used are listed, complete
100
with tightening torques, on
( 122).c
b
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a spe-
cialist workshop, preferably an
authorized BMW motorcycle
retailer.c
There is a risk of damag-
ing parts of the front
brake, particularly the
BMW Integral ABS, in the
course of the procedure de-
scribed below.
Take care not to damage the
brake system, in particular the
ABS sensor with cable and the
AMS sensor ring.c
The front wheel must be
installed right way round
to rotate in the correct direc-
tion.
Note the direction-of-rotation
arrows on the tire and the
wheel rim.c
• Roll the front wheel into the
front forks.
• Raise the front wheel, install
the quick-release axle 6 and
tighten to 50 Nm.
• Tighten axle clamping
screw 5 to 19 Nm.
• Remove the front wheel
stand.
• Ease the brake calipers on to
the brake disks.