4
44
The odometer display field
indicates the values below in
the following order beginning
z
with the current value:
Total distance covered
Tripmeter 1 (Trip I)
Tripmeter 2 (Trip II)
Resetting tripmeter
Switch on ignition.
Select desired tripmeter.
Press and hold button 1 un-
til display changes.
The tripmeter is reset to ze-
ro.
Residual range
The operating range 1 indi-
cates what distance can still
be driven with the remaining
fuel. It is only displayed on
motorcycles without an on-
board computer after the fuel
reserve is reached. The cal-
culation is carried out based
on the average consumption
and the fuel level.
When refueling, fuel is not
registered until the quantity
added is approx. one gallon
(several liters).