Front-Wheel Stand - BMW R 1200 ST User Manual

6
104
• Align the clamp 1 on the end
muffler on the marking A on
the upper side of the muffler
pipe and tighten it to 55 Nm.
• Tighten screw 2 for the
bracket of the end muffler in
the rear footrest to 19 Nm.

Front-wheel stand

A front-wheel stand for simple,
safe changing of the front
wheel is available from
BMW Motorrad. The BMW
special tool number is 363971
and the front-wheel stand is
available from your authorized
BMW motorcycle retailer.
You also need the adapters
with the BMW special tool
number 363972.
Fitting front-wheel stand
• Place the motorcycle on its
center stand.
• Slacken adjusting screws 1.
• Push pins 2 apart until the
front suspension fits
between them.
• Use locating pins 3 to set the
front-wheel stand to the
desired height.
• Center the front-wheel stand
relative to the front wheel
and push it against the front
axle.