• Remove screw 1.
• Pull off the turn indicator
glass to the side.
• Turn bulb holder 2 counter-
clockwise to remove it from
the bulb housing.
• Remove the bulb 3 from the
bulb holder.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.
Replacing rear turn
indicator bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the op-
erations described below.
Make sure that the motorcycle
is steady on its stand.c
• Switch off the ignition.
• Remove screw 1.
6
109