Description Of Each Menu - BenQ PX9210 User Manual

Description of each menu

FUNCTION
Wall color
Aspect Ratio
Keystone
Position
Phase
H.size
Digital zoom
Overscan
Operation
DESCRIPTION
Corrects the projected picture's color when the projection surface is
not white. See "Using Wall Color" on page 38
There are several options to set the image's aspect ratio depending
on your input signal source. See
36 for details.
Adjusts the shape of the projected image to ensure straight lines on
all four corners. See
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower
position of the page change with every key press you made until they
reach their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available when a PC signal
(analog RGB) is selected.
Adjusts the horizontal width of the image. This function is only
available when a PC signal (analog RGB) is selected.
Magnifies or reduces the projected image. See
searching for details" on page 36
Mask off a few pixels on each edge of the image to be displayed. Use
the function to adjust if image source happens to have noise near any
edge of the display image.
"Selecting the aspect ratio" on page
"Correcting Keystone" on page 30
for details.
for details.
for details.
"Magnifying and
53