Oven Cooking - Maytag MGR5765QDW - 30" Gas Range S/CLN 16K BRNR Flushg Use And Care Manual

Gas - precision touch control 500
Hide thumbs Also See for MGR5765QDW - 30" Gas Range S/CLN 16K BRNR Flushg:
Table of Contents

Advertisement

Available languages

Available languages

Oven Cooking

Control Panel
Broil
Use for broiling and top browning.
Bake
Use for baking and roasting.
More+ or
Enters or changes time, oven temperature.
Less-
Sets HI or LO broil.
Timer
Sets Timer.
Cook & Hold Bakes for a preset time, then holds food
warm for 1 hour.
Clean
Use to set self-clean cycle.
Delay
Programs the oven to start baking at a
later time.
Clock
Use to set time-of-day clock.
Keep Warm
Use to keep cooked food warm in oven.
CANCEL
Cancels all operations except Timer and Clock.
Using the Touchpads
• Press the desired pad.
• Press the More+ or Less- pad to enter time or temperature.
• A beep will sound when any pad is touched.
• A double beep will sound if a programming error occurs.
Important: Four seconds after pressing the More+ or Less-
pad, the time or temperature will automatically be entered. If
more than 30 seconds elapse between touching a function pad
and the More+ or Less- pad, the function will be canceled and
the display will return to the previous display.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the CANCEL and Delay
pads for three seconds.
2. Press the More+ or Less - pad to
select 12 or 24 hour.
3. Set the time of day following the
directions below.
To set the Clock:
1. Press the Clock pad.
• The colon flashes in the display.
2. Press the More+ or Less- pad to set the
time of day.
• Colon continues flashing.
3. Press the Clock pad again or wait four
seconds. The colon stops flashing.
When electrical power is supplied or after a power
interruption, the last clock time before power was interrupted
will flash.
To recall the time of day when another time function is
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for Delay Cook or Delay Clean or Cook & Hold.
To cancel the Clock display:
If you do not want the time of day to display:
Press and hold the CANCEL and Clock
pads for three seconds. The time of day will
disappear from the display
When the clock display is canceled, press
the Clock pad to briefly display the time
of day.
To restore the Clock display:
Press and hold the CANCEL and Clock pads for three
seconds. The time of day will reappear in the display.
Timer
The timer can be set from one minute (0:01) up to 99 hours
and 59 minutes (99:59).
The timer can be used independently of any other oven
activity. It can also be set while another oven function is
operating.
The timer does not control the oven. It only controls a beeper.
To set the Timer:
1. Press the Timer pad.
• 0:00 lights in the display.
• The colon flashes in the display.
2. Press the More+ or Less- pad until the
correct time appears in the display.
• The colon will continue to flash.
3. Press Timer pad again or wait four seconds.
• The colon continues flashing and the time begins
counting down.
• The last minute of the timer countdown will be displayed
as seconds.
4. At the end of the set time, one long beep will sound.
To cancel the Timer:
1. Press and hold the Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 0:00.
12

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Mgr5765qdPrecision touch control 500

Table of Contents