Table of Contents
Advertisement
52
Power Heat Duct Installation
Warning:
All wiring should be done by a qualified electrician and shall be in compliance with local
codes and with the current National Electric Code ANSI/NFPA 70 (in the U.S.), or with the
current CSC22.1 Canadian Electric Code (in Canada).
One or two optional power heat (98500769) ducts may be connected to this fireplace (top right and left of
the fireplace). Follow the directions below to prepare the power heat duct connection (for each power
heat duct used). Follow the directions included with the power heat duct for installation.
NOTE: The power heat duct should be wired for direct operation (see wiring diagram below);
1. Remove the 4 screws on the power heat duct cover and remove the cover.
2
Remove the 2 screws on the inner cover plate and remove the cover. The power heat duct is now
ready to install
© Travis Industries
Optional Equipment
Rheostat
Junction Box
Hot
Hot
(black)
(black)
Common
Common
(white)
(white)
Ground
Ground
(green)
(green)
4130710
Blower
Assembly
100-01353
Hide quick links:
Advertisement
Table of Contents
