Yeti Cycles Yeti DJ Owner's Manual page 7

Line Setup
575 has full cable housing. Putting full cable housing helps prevent corrosion from the elements and thus
keeps the shifting smoother for a longer period of time.
Caution:
The failure to properly routing shifter housing can cause malfunction of the shift mechanism and
unexpected shifting of gears.
rear derailleur Take a piece of shifter cable and fit it from the
1
rear shifter across the head tube into the outermost cable stop.
rear derailleur The second piece of rear derailleur housing runs
2
under the top tube from the outermost cable stop, across the seattube
and over the drive side seatstay. The third and final piece of shift housing
runs in a conventional manner from the cable stop on the seatstay to the
rear derailleur..
rear brake The rear brake loops across the head tube and fits into
3
the middle cable stop on the under side of the downtube. The rear
brake line follows the underside of the top tube then connects to the open
cable stop on the bottom of the seatstay. The line then crosses to the inside
of the seatstay and down to the caliper body.
setuP HOUSING 14
hOusinG end CaPs Yeti recommends using metal end
caps. The metal caps do not allow the cable to pull through
as do the plastic versions. Do not mix up the shift and brake
housing because it will result in a loss in performance.