Parts Identification; How To Use - Kenwood Smootie 2 GO SB050 series Instructions Manual

Table of Contents

Advertisement

You can use your Smoothie Blender
for making delicious and nutritious
cold drinks. The dispensing lid
means that the goblet can easily be
converted into a travel mug.
selection of recipes can be found
at the back of the instructions, and
the handy markings on the mug
allow you to mix ingredients of your
choice. Combinations of fruit and
yoghurt (both fresh and frozen), ice
cream, ice cubes, juice and milk can
be used.
before using for the first time
Wash the parts: see 'care &
cleaning'.
key
blade assembly
dispensing lid x 2
travel mug x 2
power unit
speed control
Note: Model SB054 is only
supplied with one travel mug
and one dispensing lid.
to use your smoothie
blender
1
dd ice or frozen ingredients to the
mug
.
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added up to the level marked
'max frozen ingredients'.
2
dd liquid ingredients to the mug.
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the mug to the
level marked 'max capacity'.
3 Hold the underside of the blade unit
and lower it onto the mug, blades
down – turn clockwise to lock
4 Shake to disperse the ingredients.
5 To fit the assembled mug to the
power unit, turn the mug upside
down and line up the tabs on the
mug with the grooves in the power
unit and then turn clockwise until a
positive click is heard
6 Select the required speed.
7 When the desired consistency is
8 Turn the mug the other way up and
9 Fit and lock the lid by turning
.
.
4
When blending recipes that include
frozen ingredients turn the speed
control to 'low' for 5 seconds to
start the mixing process, then turn
the speed control to 'high'.
llow the ingredients to blend until
smooth.
reached, turn the speed control to
the 'off' position. Turn the mug
anticlockwise to release it from the
power unit.
unscrew the blade assembly.
clockwise.
When you want to drink the
smoothie, simply flip open the lid
cover and clip into position
drink can be consumed straight from
the mug.
hints & tips
Note that when the mug is filled to
max capacity (500ml), this is
approximately two servings.
If you don't intend to consume your
smoothie drink immediately, keep it
refrigerated.
Ensure your smoothie drink is thin
enough to be able to drink from the
dispensing lid. To make a thinner
smoothie drink add more liquid.
Once your smoothie drink has
reached the desired consistency,
you can use the pulse 'P' to ensure
all ingredients are thoroughly
blended. Use the pulse 'P' to
operate the power unit in a start
stop action to control the texture of
your drink.
fter blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
Some drinks may separate on
standing, therefore it's best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
Don't use the Smoothie Blender as
a storage container whilst on the
power unit.
. The

Advertisement

Table of Contents
loading

Table of Contents