Table of Contents
Advertisement
Installation and Connections
About the Input Connectors
on this Unit
Consult the following chart when making connections to
your plasma monitor (pages 16-20).
Input Connector
INPUT
Connected
component and signals
DVI
Analog RGB
Component video
S video
Composite video
Analog RGB
S video
Composite video
*1 Although INPUT1/INPUT2 are compatible with various kinds of
signals, setup using the on-screen menu is necessary after
connections are made in order match the characteristics of the
source component (pages 25-26).
*2 INPUT1 is compatible with Microsoft's Plug & Play (VESA DDC
1/2B).
*3 Depending on the video output board of the computer, this type
of connection may not be possible.
*4 VESA DDC 2B only.
Connection to INPUT1 and
INPUT2
Various components can be connected to the INPUT1 and
INPUT2 terminals. After connections are made, on-screen setup
is necessary to match the characteristics of the connected
component. Please see pages 25-26 for on-screen setup after
connection.
INPUT2 terminal
[ON SYNC]
Output source
G
Video component/
G with SYNC
Personal
computer (PC)
G
with RGB output
G
Video component
with component
Y
video output
: Do not connect anything.
Note
Components compatible with INPUT1 are also compatible with INPUT2.
When making connections to INPUT1, please refer to supplement 4 on
page 47.
For the screen sizes and input signals that INPUT1 and
INPUT2 are compatible with, please refer to
supplement 1 (page 45) and supplement 2 (page 46).
16
INPUT
INPUT
INPUT
*1
*1
1
2
3
4
*2
*3
*3
[H/V SYNC]
B
R
HD
VD
B
R
B
R
H/V SYNC
B
R
HD
VD
C
/P
C
/P
B
B
R
R
: Connect to this jack.
Connection to AV components
Connection to AV component that has
component video jacks
Make component video connections for AV components
such as DVD and LD players or similar components with
component video output capability.
INPUT
For audio connections, see page 22.
5
*4
When connecting to INPUT1
INPUT1
ANALOG RGB
On-screen setup is necessary after connection. Please
see pages 25-26.
When connecting to INPUT2
(ON SYNC)
G
B
Use the supplied BNC to RCA phono
jack adapters, if necessary.
Connect the Y signal to the G terminal, the C
the B terminal, and the C
On-screen setup is necessary after connection. Please
see pages 25-26.
OUTPUT
(ANALOG RGB)
INPUT2
(H/V SYNC)
R
HD
VD
75
2.2
Ô
Ω
kΩ
/P
signal to the R terminal.
R
R
/P
signal to
B
B
Advertisement
Table of Contents
