Table of Contents
Advertisement
Installation and Connections
Audio Connections
Before making connections, be sure to check that the
audio component's power and the unit's main power is
off.
Connecting the speakers
This unit is equipped with a 5W+5W internal amplifier. If
speakers are to be connected to the unit, following the
accompanying connection instructions.
Note
When making speaker connections, be sure to match the
polarities (+ and –) of the speaker terminals on this unit and the
corresponding terminals on the speakers. If the polarity is
reversed, the sound will be unnatural and lack bass.
Making connections to the audio inputs on this
unit
This unit features four audio inputs and one audio output.
The following chart shows the video inputs and the
corresponding audio input terminals.
Video
Audio input
input
terminal
INPUT1
Stereo mini jack
INPUT2
(L/R)
RCA jacks (L/R)
INPUT3
RCA jacks (L/R)
INPUT4
RCA jacks (L/R)
INPUT 5
22
Twist exposed
wire strands
together.
Push tab to the open
position, and insert the
wire. Then, close tab
firmly to secure the wire
in place.
Sound output
Sound of the selected video
input is output from the
• SPEAKER terminals
• Stereo mini jack (L/R).
Audio connections for component (computer)
connected to INPUT 1 or INPUT 2
AUDIO
VD
INPUT
OUTPUT
(INPUT1/2)
75
2.2
Ô
kΩ
Ω
Use the supplied stereo mini to RCA
plugs cable.
Audio input to the AUDIO INPUT terminal (stereo mini
jack) is possible for a component connected to either
INPUT1 or INPUT2.
Sound is output from both the AUDIO OUTPUT terminal
(stereo mini jack) and the SPEAKER terminals according
to the video input selection.
Audio connection for component connected to
INPUT3
INPUT3
AUDIO
S-VIDEO
R
L
Audio input to the AUDIO INPUT3 terminals (pin jacks (L/
R)) is possible for a component connected to INPUT3.
Sound is output from both the AUDIO OUTPUT terminal
(stereo mini jack (L/R)) and the SPEAKER terminals
according to the video input selection.
Advertisement
Table of Contents
