Symbols And Labels - Oregon CS1500-091 Original Instruction Manual

OREGON® CHAIN SAW
MODEL CS1500-091

SYMBOLS AND LABELS

These symbols and labels appear on the chain saw and/or in this manual
SYMBOL NAME
CLASS II
CONSTRUCTION
SAFETY ALERT
SYMBOL
READ INSTRUCTIONS
WEAR EYE
PROTECTION
WEAR HEARING
PROTECTION
WEAR HAND
PROTECTION
WEAR HEAD
PROTECTION
WEAR LONG PANTS
WEAR FOOT
PROTECTION
BEWARE OF
KICKBACK
BAR NOSE CONTACT
CHAIN SAW
KICKBACK ANGLE
TWO-HANDED HOLD HOLD SAW WITH BOTH HANDS.
ONE-HANDED HOLD
DO NOT USE A
LADDER
DO NOT DISPOSE
DO NOT EXPOSE TO
RAIN
DAMAGED CABLE
CUTTING TOOL
TRIP HAZARD
UNPLUG BEFORE
MAINTENANCE
F/N 570773 - AC 0614
EXPLANATION
DESIGNATED DOUBLE INSULATED CONSTRUCTION TOOLS
INDICATES THAT THE TEXT THAT FOLLOWS EXPLAINS A
DANGER, WARNING, OR CAUTION.
THE ORIGINAL INSTRUCTION MANUAL CONTAINS IMPORTANT
SAFETY AND OPERATING INFORMATION. READ AND FOLLOW
THE INSTRUCTIONS CAREFULLY.
WEAR EYE PROTECTION WHEN OPERATING THE CHAIN SAW.
WEAR HEARING PROTECTION WHEN OPERATING THE CHAIN
SAW.
WEAR GLOVES WHEN OPERATING THE CHAIN SAW AND WHEN
HANDLING THE SAW CHAIN.
WEAR HEAD PROTECTION WHEN OPERATING THE CHAIN SAW.
WEAR LONG PANTS WHEN OPERATING THE CHAIN SAW.
WEAR APPROPRIATE CLOSED-TOE WORK BOOTS WHEN
OPERATING THE CHAIN SAW.
DANGER! KICKBACK CAN CAUSE SEVERE INJURIES.
AVOID BAR NOSE CONTACT.
DESIGNED FOR USE WITH LOW KICKBACK SAW CHAIN.
DO NOT HOLD THE SAW WITH ONE HAND.
NEVER STAND ON A LADDER WHEN USING THE CHAIN SAW.
DO NOT THROW IN HOUSEHOLD WASTE. TAKE TO AN
AUTHORIZED RECYCLER.
DO NOT OPERATE THE CHAIN SAW IN WET CONDITIONS.
INSPECT THE POWER CORD REGULARLY FOR DAMAGE.
REMOVE THE PLUG FROM THE MAINS IMMEDIATELY IF THE
CABLE IS DAMAGED OR CUT.
CUTTING TOOL. DO NOT TOUCH THE CHAIN WITHOUT FIRST
DEACTIVATING THE CHAIN SAW BY UNPLUGGING IT.
KNOW THE LOCATION OF THE CORD AT ALL TIMES.
UNPLUG BEFORE PERFORMING ANY MAINTENANCE.
SYMBOLS AND LABELS
3