Oregon CS1200 Quick Start Instructions

1
3
6
IMPORTANT SAFETY NOTICE
Wear protective gloves when handling chainsaw chain.
This sheet is meant to be a suppliment, not a replacement for your operator's manual.
ATTENTION! SAFETY NOTICE
Unplug the chainsaw
1
A
FILLING THE BAR AND CHAIN OIL
RESERVOIR
STEP 1: Place the chainsaw on a firm,
flat surface, so that the oil cap (A) is
on top.
• Clean any debris from the cap area.
• Remove the cap.
• Carefully pour 100 ml of bar and
chain oil into the reservoir.
If the reservoir is totally full on
initial startup, it can slow down
the prime. We suggest 90% full.
All manuals and user guides at all-guides.com
CS1200 CHAINSAW
Quick Start Instructions
2
4
2
A
ASSEMBLING THE GUIDE BAR AND
SAW CHAIN
Loosen the chain tensioning
STEP 2:
dial (A) as far as it will go. Then fully
loosen the side cover release knob (B)
and remove the side cover.
What's in the box?
The chainsaw requires some
5
assembly before use. These items
are included in the box.
1) Powerhead
2) Guide Bar
3) Saw Chain
4) Blade Cover
5) Side Cover
6) Instruction Manual
After removing the chainsaw from the box, inspect it
carefully to ensure no damage has occurred during
shipping and that no parts are missing. If any parts
are damaged or missing, do not use the chainsaw.
Contact Oregon® to obtain replacement parts. For
country-specific telephone numbers, see "Customer
Service by Country".
3
RED
B
Loop the
STEP 3:
saw chain onto
the bar and drive
sprocket so that the
cutters are facing in
the correct direction.