Operating The Chain Saw; General Operation - Oregon CS1500-091 Original Instruction Manual

OREGON® CHAIN SAW
MODEL CS1500-091

OPERATING THE CHAIN SAW

GENERAL OPERATION

DANGER: TO AVOID SERIOUS
PERSONAL INJURY, DO NOT OVERREACH
AND DO NOT STAND ON A LADDER,
STEPSTOOL OR ANY RAISED POSITION
THAT IS NOT FULLY SECURED. NEVER
CUT ABOVE SHOULDER HEIGHT.
WARNING: TO REDUCE THE RISK
OF INJURY, ALWAYS WEAR PROPER
BOOTS, GLOVES, HEAD, EAR AND EYE
PROTECTION.
F/N 570773 - AC 0614
OPERATING THE CHAIN SAW
GRIP
Always grip the tool with both hands Grasp
the front handle with the left hand and the
rear handle with the right (Fig 11) Wrap the
fingers over the top of the handle with the
thumb below the handle
FIG. 11
GRIP WITH THUMB
BELOW HANDLE
FOOTING
Stand with both feet on solid ground with
weight evenly spread between them (Fig 12)
FIG. 12
15