Storage, Transporting, And Disposal - Oregon CS1500-091 Original Instruction Manual

OREGON® CHAIN SAW
MODEL CS1500-091
BAR
This saw comes equipped with a reduced
kickback guide bar that has a small radius
nose Smaller radius noses have less
potential for kickback than a bar of the
same size with a larger nose radius
When replacing the bar, only order the
bar listed in this manual to maintain low
kickback performance
STORAGE, TRANSPORTING, AND
DISPOSAL
STORING THE CHAIN SAW
• Unplug the chain saw
• Inspect the cord for cuts or damage
• Clean chain saw thoroughly
• Install the guide bar cover
• Store in a dry place
• Keep out of reach of children or pets
• It is normal for a small amount of oil to
seep from the guide bar when the chain
saw is not in use To protect against
seepage, install the guide bar cover and
place an absorbent pad under the bar
TRANSPORTING THE CHAIN SAW
Tools can shift during transport Ensure the
tool is secure and cannot fall or move into
contact with people or property
• Unplug the chain saw
• Install the guide bar
• If desired, drain the bar and chain oil to
reduce seepage
CHAIN SAW DISPOSAL
This OREGON® product is designed
and manufactured with high quality
materials and components which can
be recycled and reused Please dispose
of this equipment in an environmentally
correct manner at a local community waste
collection/recycling center
F/N 570773 - AC 0614
SAFETY RULES
11