Zero Configuration Setup - D-Link DCS-930L User Manual

Section 2 - Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration Setup. Zero Configuration
automatically configures your camera's settings for you, and adds the camera to your mydlink account automatically. This
type of setup allows you to set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your
DCS-930L and add the camera to your mydlink account. After the short time it takes to do this you can remotely access your
camera from the website (http://www.mydlink.com) to manage and monitor your DCS-930L.
Connect the Ethernet Cable and Power Cable
Use the included Ethernet cable and plug it into the camera. Plug the
other end into an available port on your D-link Cloud Router. If you wish
to use your camera wirelessly, you will be able to remove the cable after
Zero Configuration Setup is complete. You can also plug the external power
adapter cable into the camera at this time.
Plug in the External Power Adapter
Plug the power adapter in to a wall outlet.
D-Link DCS-930L User Manual

Zero Configuration Setup

12