Section 3 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local
You may save your current camera configuration as a file on your computer by
Hard Drive:
clicking Save Configuration File.
Load From Local
Locate a pre-saved configuration by clicking Choose File and then restore the
Hard Drive:
pre-defined settings to your camera by clicking Restore Configuration File.
Restore To
You may reset your camera and restore the factory settings by clicking Restore
Factory Default:
Factory Defaults.
Reboot The
This will restart your camera.
Device:
D-Link DCS-930L User Manual
System
40