Maintenance; Admin - D-Link DCS-930L User Manual

Section 3 - Configuration
This section allows you to change the administrator's password and configure the server settings for your camera. You can also manage the user
account(s) that access your camera.
Old/New/Retype If you wish to change the admin password for your camera, enter the old
Password: password, enter the new password, then retype the new password and click
Apply.
Camera Name: Specify a name for your camera.
LED Control: Select Normal to enable the LEDs on the device, or select off to disable the LEDs
for a more discreet installation.
User Access Select Enable to enable user access control or Disable to allow only the
Control:
administrator account to access the camera.
Snapshot URL Select Enable to allow access to the current camera snapshot via the web
Authentication: address indicated.
Add User
Create new user for accessing your camera's video. Enter the user name,
Account: password, and password again, and click Add. A maximum of 8 user accounts
can be added into the user list.
User List:
Displays the account names of authorized users.
D-Link DCS-930L User Manual

Maintenance

Admin

39