D-Link DCS-930L User Manual page 35

Section 3 - Configuration
Enable e-mail
Enable this option to allow snapshots to be sent using the settings entered
image to e-mail above.
account:
Choosing Always will start sending snapshots to the recipient's e-mail account
right away. Choosing Schedule will allow you to schedule when to start and
stop the sending of snapshots to the recipient's e-mail account.
Select Motion/Sound Detection if you would like to send snapshots when
motion or sound is detected. You can choose to E-mail frame immediately
to send a snapshot taken when motion/sound was detected, or use E-mail
attached with 6 frames to include snapshots before and after the detected
event. The Frame interval time determines the time between each snapshot.
E-mail Interval: This will set the interval between snapshot e-mails.
• If Always is selected, e-mails will be sent according to this interval.
• If Schedule is selected, e-mails will be sent according to this interval during
the times and days specified in the schedule.
• If Motion/Sound Detection is selected, e-mails will be sent according to this
interval while motion or sound is being detected.
Test E-mail
This will send a test snapshot by using the e-mail settings specified above.
Account:
D-Link DCS-930L User Manual 35