Setting The Navigator - VDO M4WL Operator's Manual

M4 WL

Setting the navigator

The navigator is a second, completely independent
trip distance counter.
The navigator can:
– be reset to zero any number of times during a trip
– be set to a distance value
– count forwards or backwards from the set distance value.
How to set the navigator:
Press the BIKE button to display the navigator function.
Navigator setting range: -99.99 to +999.99 km or miles.
Once the navigator function is on the display, press
and hold the SET button until the settings menu opens.
First select whether the navigator should count forwards or
backwards from the set value.
Make this selection by pressing the BIKE or ALTI button.
Press the SET button to confirm your selection.
The screen for setting the navigator's distance value is
opened. The first digit on the left flashes.
Press the BIKE or ALTI button to change this digit.
Press the SET button to confirm the entry.
40