Setting The Navigator; Resetting The Navigator To Zero - VDO M5 Short Instruction Manual

Setting the navigator

SET
– Press the BIKE button to view the
– Press and hold the SET button
– Change the data:
– Confirm the setting:
TPC BIKE
52
Navigator function on the display
Press theBIKE or TPC button
Press the SET button

Resetting the navigator to zero

SET – Display the Navigator function
– RESET: Press and hold the BIKE button
TPC BIKE
Light mode ON/OFF
SET
TPC BIKE
ATTENTION: light mode is automatically disabled after a break to save the
batteries.
– ON: Simultaneously press
the TPC + SET buttons
– OFF: Simultaneously press
the TPC + SET buttons
53