Total Ride Time - VDO M4WL Operator's Manual

M4 WL
Settings – total values – total ride time
You can set the total ride time on the VDO M4 WL. E.g. you
can set your total ride time (total ride time for all trips) at the
start of the new cycling season).
You can set the values separately for bike 1 and bike 2.
ATTENTION: the M4 WL has a data memory.
No data is lost when the battery is replaced.
How to set the total ride time:
Press and hold the SET button until the settings menu
opens.
Press the BIKE button to switch from Totals to Settings.
Press the SET button to open the settings.
"Language" appears on the display.
Press the BIKE or ALTI button to scroll to the setting for
the Total Time.
Press the SET button to open the setting for the Total Time

(total ride time).

Press the BIKE to select whether you want to set the
total time for bike 1 or bike 2.
Press the SET button to confirm the selection.
The left digit of the hours setting flashes and is
ready to be set.
Press the BIKE or ALTI button to set the value of this digit.
Press the SET button to confirm your setting.
34