Electrical Safety; Mains Plug Replacement - Black & Decker PRMP1000 User Manual

• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power supply cord or mains plug is
damaged or defective it must be
repaired by an authorised repair agent in
order to avoid a hazard. Do not cut the
power supply cord and do not attempt
to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
• Do not attempt to repair the appliance.
Take it to your nearest Black+Decker
owned or authorised Service Centre for
repair.
• Do not allow children to use the
appliance without supervision

Electrical safety

Before use, check that the mains voltage
corresponds to the voltage on the rating
plate.
This appliance is double insulated
in accordance with EN 60335;
therefore no earth wire is required.
• To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in
water or other liquid.
• Check that the supply voltage shown on
the rating plate of the appliance matches
that of your electrical system. Any
connection error will invalidate the
guarantee.

Mains plug replacement

If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live
terminal of the new plug.
• Connect the blue lead to the neutral
terminal.
• If the product is class l (earthed),
connect the green / yellow lead to the
earth terminal.
Warning! If your product is class ll
double insulated (only 2 wires in the
cord set), no connection is to be made to
the earth terminal.
Follow the fitting instructions supplied with
good quality plugs
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Assembly
Warning! Before assembly, make
sure that the appliance is switched
o and unplugged.
Remove all packaging from the parts of the
appliance.
Clean the appliance before first use.
ENGLISH
5