Black & Decker BL0976-1MDLA, BL0976-1MDCL - 700 Watt Digital Blender Instructions

OVERVIEW

Product may vary slightly from what is illustrated.

1. Dual-opening lid
2. Pour spout
3. Ingredient slot
4. Handle
5. Jar base (not shown)
6. Digital Control Panel
7. Base
8. Stainless steel 4 tip blade

Please do not throw this product away with normal household waste. If possible, take it to an official collection point in your area that recycles this type of product. Thank you for considering the environment..

BLACK+DECKER® and the BLACK+DECKER® logos are trademarks of The Black & Decker Corporation, used under license by Empower Brands, LLC, a subsidiary of Spectrum Brands, Inc. for its manufacturing and sale of this product. All rights reserved. All other marks are trademarks of Empower Brands, LLC.

POLARIZED PLUG (120V MODELS ONLY)

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

ELECTRICAL CORD

The cord of this appliance was selected to reduce the possibility of tangling in or tripping over a longer cord. If more length is needed, use an extension cord rated no less than 15-amperes. (For 120 volts rated products, use an extension cord rated no less than 6-amperes). When using an extension cord, do not let it drape over the working area or dangle where someone could accidentally trip over it. Handle cord carefully for longer life; avoid jerking or straining it at outlet and appliance connections.

TAMPER-RESISTANT SCREW

This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified personnel; in Latin America, by an authorized service center.

HOW TO USE

This unit is for household use only.

GETTING STARTED

• Remove all packing material and any stickers from the product.
• Wash all removable parts as instructed in CARE AND CLEANING section of this manual.

BLENDER JAR ASSEMBLY

1. Turn blending jar upside down and place flat on counter top or work surface.
2. Place the blade assembly in bottom opening of the jar with blades down.
3. Place jar base onto jar and rotate clockwise until it is tight (A).
   
4. Turn assembled jar right side up.
5. Place lid with lid cap on blender jar.
6. Uncoil power cord from storage area under the base.
7. Blender is now ready for use.

USING YOUR BLENDER

Appliance should always have lid in place when in use.

Do not place blender jar onto base when motor is running.

1. Make sure appliance is OFF.
2. Place ingredients to be blended into jar. For best results, add ingredients in the following order:
   1. Liquids
   2. Powders
   3. Soft foods
   4. Hard foods
   5. Ice cubes last

Tip: When using frozen fruits it is not necessary to also add ice.

3. Place lid on jar; make sure the pour spout and ingredient slot are closed.
4. Plug power cord into outlet. Press ON/OFF button. LED should turn a solid color to signify the blender is in standby mode. After 2 minutes the unit will automatically power off if no buttons are pressed.
   Note: When in use, do not leave blender unattended. When using hard foods, such as ice or cheese, keep one hand on the lid to keep blender in place.
5. Select the speed that best suits your desired task. (See SPEED CHART)
   
   Do not hold speed button. Simply press the desired speed, watch, and press PULSE/STOP button to return to standby mode when the desired consistency is achieved. Holding the button for longer than 30 seconds will cause the blender to shut off. Unit must be shut off to reset.
6. When blending thick mixtures, such as smoothies and milkshakes, use the PULSE button for several seconds, then release. Repeat to mix ingredients and then run continuously until food has reached desired consistency. Releasing PULSE/STOP stops the blending and the unit returns to STANDBY. You may use a spatula or utensil to move ingredients and thick mixtures around in the blender jar, but only after turning the blender off using the ON/OFF button.
7. Open the ingredient slot to add ingredients while the blender is running. Drop ingredients through the opening. (B).
   
   
   Do not remove the lid while the blender is running.
8. When finished, press ON/OFF to stop blending.
   Make sure blades have completely stopped before attempting to remove the blending jar from the base.
9. Unplug the blender.
10. To remove the jar, grasp the handle and lift up.
11. Open pour spout to serve.
    Note: Unit will auto shutoff after 2 minutes without use.
12. Always unplug the appliance when not in use.

USING THE PREPROGRAMMED FUNCTIONS

• Fill the assembled blender jar with the desired ingredients.
• Place the dual-opening lid on the jar.
• Place the jar on the base.
• Press desired preprogrammed button. The blender will automatically mix and blend the ingredients with the press of a button.

INTELI-FUSE™ PROTECTION:

• Your blender comes with intelligent protection. The blender may overheat when blending extremely heavy loads or mis-operation. If this occurs, the blender will automatically shut off. Unplug the blender; wait 20 minutes and then resume use of the blender. DO NOT RETURN THE BLENDER.

BLENDING TIPS AND TECHNIQUES

• Cut food into pieces no larger than ¾" for use in the blender.
• When preparing foods that have several different kinds of ingredients, always add liquid ingredients first.
• The blender will turn OFF automatically when used longer than 2.5 minutes continuously.
• When ingredients splatter onto the sides of the jar or the mixture is very thick, press the ON/OFF button to turn appliance off. Remove the lid and use a rubber spatula to scrape down the sides of the jar and to redistribute the food, pushing food toward the blades. Replace the lid and continue blending.
• When making bread crumbs make sure blender jar is completely dry.
• When using Pulse function, use short bursts. Allow the blades to stop rotating between pulses. Do not use PULSE for more than 2 minutes. The Blender will turn OFF automatically when the PULSE button is pressed longer than 2 minutes continuously.
• The PULSE function is helpful when short bursts of power are needed, such as when preparing thick smoothies or milkshakes.
• It is helpful to begin the blending process on the lowest speed and then increase to a higher speed, if necessary.
• To stop blending at any time, press the ON/OFF button.
• When blending hot ingredients, remove the lid and then put it back partly open, with the opened side tilted away from you. Cover lid with a cloth to avoid splattering and only use the lowest speed. Do not blend more than 2 _1/2 to 3 cups at a time.

DO NOT PLACE ANY OF THE FOLLOWING IN THE BLENDER:

• Large pieces of frozen foods
• Tough foods such as raw turnips, sweet potatoes and potatoes
• Bones
• Hard salami, pepperoni
• Boiling liquids (cool for 5 minutes before placing in blending jar)

OTHER DONT'S:

• Do not operate blender without the lid on the blending jar.
• Do not store foods in the blending jar.
• Do not overfill the blender (the blender is more efficient with less rather than more).
• Do not put boiling liquids into blender.
• Do not use PULSE for more than 10 seconds at a time; release the PULSE/STOP button regularly, allow the blender to rest briefly, then continue.
• Do not run blender for longer than 3 minutes at a time. Scrape down sides of blender jar, if necessary, and continue blending.
• Do not use if blending jar is chipped or cracked.

TASKS NOT RECOMMENDED FOR THE BLENDER:

• Beating egg whites
• Mixing dough
• Mashing potatoes
• Grinding meats

SPEED AND FUNCTION CHART

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified service personnel.

Helpful Tips:

• For quick and easy cleanup, combine 1 cup hot water and a drop of liquid dish soap in the blending jar.
• Cover and press the AUTO CLEAN button. The blender will automatically clean the jar.
• Discard liquid and rinse thoroughly.

CLEANING

1. Before cleaning, turn off and unplug the appliance.
2. Lift the blending jar by the handle off the base turning slightly counterclockwise.
3. Remove jar base by turning it counterclockwise until loose.
4. Remove the blade assembly.
   
   Blades are sharp, handle carefully.
5. Remove lid and lid cap.
6. Wash removable parts by hand or in the dishwasher. Place the jar on the bottom rack and the rest of the parts on the top rack only.

• Do not place the jar parts in boiling liquids.
• Do not immerse the base in liquid. Wipe the base with a damp cloth and dry thoroughly.
• Remove stubborn spots by rubbing with a damp cloth and nonabrasive cleaner. Note: If liquids spill onto the base, wipe with a damp cloth and dry thoroughly. Do not use rough scouring pads or cleansers on parts or finish.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions.
• To protect against risk of electrical shock, do not put blender base, cord or plug in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
• Avoid contacting moving parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment. Or, call the appropriate toll-free number listed on the cover.
• The use of attachments, including canning jars, not recommended or sold by the appliance manufacturer may cause fire, electric shock or injury.
• Do not use outdoors.
• Do not let the plug or cord hang over the edge of table or counter.
• Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
• Blades are sharp. Handle carefully.
• To reduce the risk of injury, never place cutter assembly blades on base without the jar properly attached.
• Always operate blender with cover in place.
• When blending hot liquids, remove center piece of two-piece cover.
• Do not use appliance for other than intended use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the appliance due to a sudden steaming.

SAVE THESE INSTRUCTIONS
This product is for household use only.