I Have Forgotten The Administrator Password; Subnet Doesn't Match; Camera Can Not Record; No Pictures Problems - Foscam FI9805P User Manual

www .foscam. us
www .foscam. us
Figure 6.9

6.1.3 I have forgotten the administrator password

To reset the administrator password, you had better unplug the network cable firstly. After that, press and hold
down the RESET BUTTON about 5 seconds. Releasing the reset button, the password will turn to the factory
default.
Default administrator username/password: admin with blank password

6.1.4 Subnet doesn't match

Check whether your ipcamera in the same subnet of your computer. The step is Control PanelNetwork
ConnectionsDbclick Local Area Connections  Choose GeneralProperties.Check subnet mask, IP
address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise
you can't access camera.

6.1.5 Camera can not record

Camera can not record when I click Record button or I can't change the manually record path.
When you use Windows7 or Vista, you may be not able to do manually record or change the record path
because of the security settings of computer.
There are two ways to resolve this problem:
(1) Please add the camera as a trusted site to resolve this issue. The steps are
IE browserToolInternet PropertiesSecurityTrusted sitesSitesAdd
(2) Open IE browser, then right click, select "Run as administrator"

6.1.6 No Pictures Problems

The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn't installed correctly you
will see no video image. You can resolve this problem by this way:
Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE
browser  Tool  Internet Proper  Security  Custom Level  ActiveX control and Plug-ins. Three options of
front should be set to be "Enable", The ActiveX programs read by the computer will be stored. As follows:
Foscam Digital Technologies LLC
67
Telephone: 1-800-930-0949