Cisco ASA 5510 Quick Start Manual page 51

export@cisco.com.
***LICENSE NOTICE***
There is no license key installed on the system.
Please go to http://www.cisco.com/go/license
to obtain a new license or install a license.
AIP SSM#
If you see this license notice (which appears only in some versions of the software), you can
Note
ignore the message until you need to upgrade the signature files on the AIP SSM. The AIP SSM
continues to operate at the current signature level until a valid license key is installed. You can
install the license key at a later time. The license key does not affect the current functionality
of the AIP SSM.
Enter the setup command to run the setup utility for initial configuration of the AIP SSM.
Step 3
AIP SSM# setup
What to Do Next
You are now ready to configure the AIP SSM for intrusion prevention. See the following guides for AIP
SSM configuration information:
Configuring the Cisco Intrusion Prevention System Sensor Using the Command Line Interface
•
Cisco Intrusion Prevention System Command Reference
•
51