Cisco ASA 5510 Quick Start Manual page 26

Step 3: Specify the VPN tunnel group name and authentication method.
In Step 3 of the VPN Wizard, complete the following steps:
Enter a Tunnel Group Name (such as "CiscoASA") for the set of users that use common
1.
connection parameters and client attributes.
Specify the type of authentication that you want to use by performing one of the following steps:
2.
To use static pre-shared keys for authentication, click Pre-Shared Key, and enter a key (such
–
as "CisCo").
To use digital certificates for authentication, click Certificate, choose the Certificate Signing
–
Algorithm (rsa-sig/dsa-sig) from the drop-down menu, and then choose a pre-configured
trustpoint name from the drop-down menu.
Click Next to continue.
3.
26