Cisco ASA 5510 Quick Start Manual page 13

Step 1: Configure IP Pools for Network Translations.
For an inside HTTP client (10.10.10.10) to access the web server on the DMZ network (10.30.30.30),
it is necessary to define a pool of IP addresses (10.30.30.50–10.30.30.60) for the DMZ interface.
Similarly, an IP pool for the outside interface (209.165.200.225) is required for the inside HTTP client
to communicate with any device on the public network. Use ASDM to manage IP pools efficiently and
to facilitate secure communications between protected network clients and devices on the Internet.
Launch ASDM by entering this factory default IP address in the address field of a web browser:
1.
https://192.168.1.1/admin/.
Remember to add the "s" in "https" or the connection fails. HTTPS (HTTP over SSL)
Note
provides a secure connection between your browser and the adaptive security
appliance.
Click Configuration at the top of the ASDM window.
2.
Choose the NAT feature on the left side of the ASDM window.
3.
13