Cisco ASA 5510 Quick Start Manual page 37

From the drop-down menu, choose outside as the enabled interface for the current VPN
b.
tunnel.
Click Next to continue.
c.
Step 2: Provide information about the VPN peer.
The VPN peer is the system on the other end of the connection that you are configuring, usually at a
remote site.
On page 2 of the VPN Wizard, provide information about the remote VPN peer. In this scenario, the
remote VPN peer is ASA security appliance 2, from this point forward referred to as ASA 2. Perform
the following steps:
Enter the Peer IP Address (ASA 2) and a Tunnel Group Name.
1.
37