Cisco ASA 5510 Quick Start Manual page 30

Step 7: Configure client attributes.
To access your network, each remote access client needs basic network configuration information,
such as which DNS and WINS servers to use and the default domain name. Rather than configuring
each remote client individually, you can provide the client information to ASDM. The adaptive
security appliance pushes this information to the remote client when a connection is established.
Ensure that you specify the correct values, or remote clients will not be able to use DNS names for
resolution or use Windows networking.
In Step 7 of the VPN Wizard, perform the following steps:
Enter the network configuration information to be used by remote clients.
1.
Click Next to continue.
2.
30