11-4. Wiring Diagram
Carefully ensure that wiring is accomplished as illustrated below. As incorrect wiring will result in lack of rotation,
reverse rotation or other malfunctions, close attention is absolutely necessary.
WARNING: Be sure to turn off Switch (A) (1P Type) [252] on the side of the switch handle and unplug
the power cord plug from the receptacle before replacing the Laser Module (A) Ass'y [12A]
and the Switching Power Supply [249]. Do not stare into beam while the laser marker is
lighting.
Wiring diagram (C 12LCH)
USA/CAN
Fig. 38-1
--- 34 ---