Wiring Diagram - Hitachi C 10FCH2 Technical Data And Service Manual

11-4. Wiring Diagram

Carefully ensure that wiring is accomplished as illustrated below. As incorrect wiring will result in lack of rotation,
reverse rotation or other malfunctions, close attention is absolutely necessary.
WARNING: Be sure to turn off the Switch (W/Cover) [165] on the side of the switch handle and unplug
the power cord plug from the receptacle before replacing the Laser Holder [1] and the
Switching Power Supply [157]. Do not stare into beam while the laser marker is lighting.
Wiring diagram
1
C 10FCH2 USA/CAN
Fig. 32-1
--- 28 ---