Table of Contents
Advertisement
Panic Recording
Recording
Press the REC button or navigate to Manual
Management in the main menu to start manual
picture/video recording. The settings are identical for
snapshots and so will only be described once.
If a recording is started manually, it also has to be
stopped manually. All manual recordings will be
deactivated when the recorder is rebooted.
Click on the "Record" submenu.
Select the settings for all cameras. Click on "Off" or "On"
to change the settings.
"On (green)" "Off (red)"
Manually stop recording
"Off (red)" "On (yellow)"
Manual continuous recording
"On (yellow)" "Off (red)"
Manual continuous recording is stopped and if a
schedule has been configured for the camera, it will be
activated automatically (green).
Parameter
Description
Normal
Click on the icon to activate continuous
recording for all channels for the whole
day.
Click on "Yes" to confirm your selection.
Motion
Click on the icon to activate motion
detection
detection for all channels for the whole
day.
Click on "Yes" to confirm your selection.
Alarm
Here you can select the alarm output which should be
switched in the event of manual management.
You can switch several alarm outputs in the event of a
manual response.
Select Trigger to activate the selected alarm output.
Click on Trigger All to activate all of the alarm outputs.
Click on Clear All to remove the settings.
Panic Recording
49
Advertisement
Table of Contents
