Table of Contents
Advertisement
Parameter
Full Screen Monitoring
Audible Warning
Notify Surveillance
Center
Send Email
Trigger Alarm Output
PTZ Linking tab
Here you can control specific PTZ presets, patrols or
patterns for a taught-in camera.
Parameter
PTZ Linking
Call Preset
Call Patrol
32
Notifications
The camera is displayed in
full screen in live view.
The device emits a repeated
signal tone.
The CMS emits an audible
warning tone.
An email is sent to a
specified email address. See
page 29.
The alarm output is triggered
in the event of an alarm.
Notifications
Select the camera to be
controlled using a PTZ
command in the event of an
alarm.
Select the preset number.
Select the patrol number.
Call Pattern
Confirm the settings by clicking on Apply and exit
the menu by clicking on OK.
Alarm Output tab
Parameter
Setting
Alarm
Select the alarm output to adjust the
Output No.
settings. You can select the alarm output
for an IP camera using the network
address data.
Alarm Name Enter a clear description, e.g. warehouse
door contact.
Dwell Time
Select the dwell time for switching the
alarm output.
Activate the alarm output by ticking the "Settings"
box.
Define the schedule for the recorder alarm output in
the event of an alarm under "Settings".
Click on Copy to apply these settings to other
cameras.
Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.
Configuration
Select the pattern number.
Advertisement
Table of Contents
