Table of Contents
Advertisement
Network Settings
Note
To check whether DHCP can be selected (or if
you have to set the IP address and other settings
manually), consult your network administrator.
1.
DHCP activated: If DHCP is set up in the network
router, then tick the DHCP box. All network settings
are then made automatically.
2.
DHCP not activated: Enter the data manually (IPv4
address, IPv4 subnet mask and IPv4default gateway
= IPv4 address of the router). You can also
optionally enter the address of the DNS server that
you need for sending the E-mail.
A typical address specification is as follows:
IPv4 address:
IPv4 Subnet mask:
IPv4 Default gateway:
Preferred DNS server:
Note
When the device is accessed remotely via the
internet, it should be given a fixed network
address.
16
HDD Management
1.
2.
3.
192.168.0.50
255.255.255.0
192.168.0.1
192.168.0.1
To set up a new hard disc, activate the "Check box"
with a left click and then click on Init.
Warning
All data on the drive is deleted!
Confirm the prompt by pressing OK. The HDD is
then set up for operation. The progress is displayed
on the status bar.
Exit the setting by pressing Next.
Setup wizard
Advertisement
Table of Contents
