Ip Camera Import/Export Tab; Osd - Abus TVVR35002 User Manual

5-channel
Hide thumbs Also See for TVVR35002:
Table of Contents

Advertisement

Click on Protocol to create a custom RSTP profile for the
selected camera.
Note
If your camera model is not included in the
compatibility list, you also have the option of
setting up the camera on the recorder using an
RTSP streaming profile. To do this, you will need
the RTSP URL for the camera live stream, which
you can find in the user guide for your camera or
request from the manufacturer.
Protocol
Here you can create a custom RTSP profile, which can
then be assigned to a camera in the "Custom Adding"
menu.
Note
If you integrate a camera using RTSP, only the
video image from the camera will be available on
the recorder. Camera control functions (e.g. PTZ)
and motion detection are not supported.
Parameter
Setting
User
Select a value between 1 and 16. The
Protocol
settings will be saved here.
Protocol
Select any name.
Name
Stream Type All values below "Main Stream" will be
used for the main stream
(live+recording).
All values below "Substream" will be
used for the substream (multi view live).
Substream
Enables the substream.
Type
RTSP
Transfer
Use the auto settings, provided that
Protocol
there are no special requirements.
Port
RTSP port entered
Path
Specifies the RTSP streaming path on
the IP camera.
Note
You can usually find information on the RTSP
streaming path in the camera manual or on the
manufacturer's website. Ask the manufacturer
directly when required if there is not enough
information on the path.
Typical layout of an RTSP streaming path:
36
rtsp://192.168.0.1:554/video.h264
Parameter
Setting
Rtsp://
The protocol followed by "//"
192.168.0.1
IP address of the camera, separated by
dots
:554
Colon followed by the RTSP port of the
IP camera
/video.h264
"/" followed by the path and streaming
parameter
Note
If your camera supports several streams, we
recommend using the high-quality stream for the
"Main Stream" setting and an alternative stream of
a lower quality for the "Substream" setting.

IP Camera Import/Export tab

Here you can export and import all camera settings and
configured camera lists from/to an external data storage
device.
Click on Import to import a camera list from a data
storage device.
Click on Export to export a list of all saved cameras to an
external data storage device.

OSD

Camera

Advertisement

Table of Contents
loading

Table of Contents