Table of Contents
Advertisement
Introduction
Keyboard
The on-screen keyboard appears after clicking on a text
entry field with the mouse:
The following screen keyboard appears during mere
numerical entry:
The keys have the same function as on a computer
keyboard.
To enter the character, left-click the mouse.
To finish data entry, press Enter.
To delete the character in front of the cursor,
click on .
To switch between upper and lower case, click on the
framed a symbol. The current setting is displayed
above the keyboard.
To cancel the entry or exit the field, press ESC.
Starting the device
Important
The device must only be operated with the mains
power specified on the type plate.
For safety reasons, use an uninterruptible power
supply (UPS).
When the device is connected to the power supply, it
starts up automatically and the LED status bar glows.
1.
The device carries out a self-test during the start-up
procedure.
2.
The setup wizard appears. Exit the wizard to access
the live view.
14
Switching off, locking and rebooting the
device
Click on "ShutDown" in the main menu. The overview
appears.
1.
To switch off the device, select ShutDown and
confirm by pressing Yes. The device is then
switched off.
Do not press any keys during the shutdown
procedure.
Now pull out the plug of the power supply unit.
2.
To lock the system, select the corresponding Lock
symbol on the left. The user interface is now locked
and a password must be entered to access the
menu.
3.
To reboot the device, select the corresponding
Reboot symbol on the right. The device is then
rebooted.
Switching on the device
Plug in the power supply unit to start the device.
Advertisement
Table of Contents
